Description

– Light control with switch and push button possible
– Integrated flasher relay, control via push buttons or switches

– The bike can be controlled by 2 buttons or 5 buttons.

– 6 status led´s for the output control integrated.
– emergency flash function
– comfort flasher function
– Control of horn
– Control of starter relay or brake light.

The 2 button mode is easy to use:

– A short press on one of the buttons will activate the indicators.

– A longer press (> 0,3 sec) on the left button switch on the horn.

– 2 short presses on the left button change between the low – and high beam.

– A long press (> 0,3 sec) activate the starter if the starter option is set.

You can use thin cable from the control box to the handlebars. This simplifies the wiring of cables in the handlebar. The flashing speed is about 90 cycles / minute and will not change if you use LED lights. A comfort flasher function can be activated and will turn off the turn signal automatically after 40 x if no button is pressed in the meanwhile. When using buttons you can activate an emergency flash function with simultaneously pressing the flashing buttons (for example, press and hold the left, right, press and hold the left release) .