Description

The Easy Keyless FP comes with a fingerprint sensor what contains a 25 mm thread with nut what makes the implementation in your bike as easy as possible. The module can learn 2 fingers.

The activation of the module is made via a press on a button. Now you have 15 seconds time to lay your finger on the sensor. A violet ring around of the sensor indicate the waiting state of the module. If the finger is recognized then the led ring changes to blue color and the power for the bike is switching on. If the finger is not recognized then the module fall back in sleep mode in order to reduce the power consumption of the bike to a minimum.

By the way, if you use a control box from us then there is no need to wire an extra button to the module. The Easy Keyless FP have an extra output what simulate the function of a start button, resulting that you can use your original start button at the bike also for the activation of the module.

We suggest to use the sensor in the following way in order to increase the reliability:

It makes sense to dry the sensor and the finger a bit with a cloth if you drive in rainy weather.

You can save the same finger more than one time if it is not good recognized.

The recognition of a middle finger have the highest score, following the index finger and the ring finger.

Save prior the right fingers if you are right – handed.

An injured finger is bad to recognize.

Install the sensor somewhere on a place what is easily to reach.